Measurement of heat transfer coefficients for steam condensation on a vertical 21.5-mm-O.D. tube in the presence of air

ABSTRACT

Governing the rate of heat transport by condenser tubes in the passive containment cooling system (PCCS), the steam condensation over a vertical cylinder in the presence of air was investigated experimentally. The main objective of this study was to explore if the condensation heat transfer coefficient relies on the tube dimension, which has been a variable missed in most condensation models or has been embraced without experimental demonstration under phase change environments. The mean heat transfer coefficient was measured in the condensation test facility named JERICHO (JNU Experimental Rig for Investigation of Condensation Heat transfer On tube). The outer diameter of the condenser tube used in this study was set to 21.5 mm. The measured heat transfer coefficients were compared to those obtained from the 40-mm-O.D. tube, and a multiplier to correct the variation of the heat transfer coefficient with the tube diameter was proposed for its application to Lee correlation. The proposed correlation was further validated against another set of experimental data obtained from a separate test facility housing the 31.8-mm-O.D. tube.     

面部运动单元检测研究综述

面部运动单元检测旨在让计算机从给定的人脸图像或视频中自动检测需要关注的运动单元目标。经过二十多年的研究，尤其是近年来越来越多的面部运动单元数据库的建立和深度学习的兴起，面部运动单元检测技术发展迅速。首先，阐述了面部运动单元的基本概念，介绍了已有的常用面部运动单元检测数据库，概括了包括预处理、特征提取、分类器学习等步骤在内的传统检测方法；然后针对区域学习、面部运动单元关联学习、弱监督学习等几个关键研究方向进行了系统性的回顾梳理与分析；最后讨论了目前面部运动单元检测研究存在的不足以及未来潜在的发展方向。     

R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

As a figure-of-merit, the rising ratio of crack propagation resistance to fracture initiation resistance indicates a reduction of the brittleness and enhances the thermal shock resistance of ordinary refractory ceramics. The significant nonlinear fracture behaviour is related to the development of a fracture process zone (FPZ). The universal dimensionless load–displacement diagram method is applied as a promising graphical method for the determination of R-curves for magnesia refractories showing different brittleness. By applying digital image correlation (DIC) together with the graphical method, the problems arisen with accurate determination of the fracture initiation resistance and the crack length are overcome. Meanwhile, the R-curve is subdivided with respect to the fracture processes, viz the fracture initiation, the development of FPZ and the onset of traction free macro-crack. With the simultaneous crack lengths evaluated from DIC, the contribution of each fracture process to the crack propagation resistance at certain loading stage is quantitatively presented.     

40 years FORM: Some new aspects?

40 years ago Hasofer and Lind wrote their seminal paper [13] about FORM where they described an algorithm for finding the beta point. This algorithm, later in 1978 generalized by Rackwitz and Fiessler in [23] to include nonnormal random variables, is known as Hasofer-Lind–Rackwitz-Fiessler (HL–RF) algorithm and till now it is an important tool for reliability calculations. Here its relation with standard numerical optimization is explained. Further a simple method for computing the SORM factor is given and the connection of FORM/SORM with dimension reduction concepts is outlined.     

A Method for Systematic Assessment of Intrinsically Disordered Protein Regions by NMR

Intrinsically disordered proteins (IDPs) that lack stable conformations and are highly flexible have attracted the attention of biologists. Therefore, the development of a systematic method to identify polypeptide regions that are unstructured in solution is important. We have designed an “indirect/reflected” detection system for evaluating the physicochemical properties of IDPs using nuclear magnetic resonance (NMR). This approach employs a “chimeric membrane protein”-based method using the thermostable membrane protein PH0471. This protein contains two domains, a transmembrane helical region and a C-terminal OB (oligonucleotide/oligosaccharide binding)-fold domain (named NfeDC domain), connected by a flexible linker. NMR signals of the OB-fold domain of detergent-solubilized PH0471 are observed because of the flexibility of the linker region. In this study, the linker region was substituted with target IDPs. Fifty-three candidates were selected using the prediction tool POODLE and 35 expression vectors were constructed. Subsequently, we obtained ¹⁵N-labeled chimeric PH0471 proteins with 25 IDPs as linkers. The NMR spectra allowed us to classify IDPs into three categories: flexible, moderately flexible, and inflexible. The inflexible IDPs contain membrane-associating or aggregation-prone sequences. This is the first attempt to use an indirect/reflected NMR method to evaluate IDPs and can verify the predictions derived from our computational tools.     

Optimal-correlation-based reconstruction for distributed compressed video sensing

Distributed compressed video sensing (DCVS) is a framework that integrates both compressed sensing and distributed video coding characteristics to achieve a low-complexity video coding. However, how to design an efficient joint reconstruction by leveraging more realistic signal models is still an open challenge. In this paper, we present a novel optimal-correlation-based reconstruction method for compressively sampled videos from multiple measurement vectors. In our method, the sparsity is mainly exploited through inter-signal correlations rather than the traditional frequency transform, wherein the optimization is not only over the signal space to satisfy data consistency but also over all possible linear correlation models to achieve minimum-l₁-norm correlation noise. Additionally, a two-phase Bregman iterative based algorithm is outlined for solving the optimization problem. Simulation results show that our proposal can achieve an improved reconstruction performance in comparison to the conventional approaches, and especially, offer a 0.7–9.9 dB gain in the average PSNR for DCVS.     

Characterisation of crack-tip fields in biaxial fatigue based on high-magnification image correlation and electro-spray technique

This work presents a novel methodology for characterising fatigue cracks under biaxial conditions on a low carbon steel. It allows both short crack and early propagation stages to be studied in tubular specimens. Short crack growth is studied with a long-distance microscope acquiring images of the bare metal surface. Results showed oscillations in crack growth rate due to microstructure. Early propagation stage is studied with high magnification Digital Image Correlation (DIC) technique for measuring displacement and strain crack-tip fields. By applying micro-speckle pattern on the metal surface it is possible to achieve high magnification for DIC technique. Ultra-fine black and white speckles were created by electro-spray technique. The validity of this novel technique is demonstrated by direct comparison with extensometer measurements, under combined tension–compression and torsion conditions. It was also possible to estimate satisfactorily the mixed-mode stress intensity factor.     

Assessment of digital image correlation method in determining large scale cemented rockfill strains

A conventional contact method(using linear transducers) and a non-contact method are deployed to measure the axial and lateral deformations of large scale cylindrical cemented rockfill specimens.Experimental works incorporating two pinhole cameras to create one stereovision by digital image correlation shows that the non-contact method is as reliable for testing large cylindrical specimens as measurements done by using linear variable displacement transformer and string potentiometer. Considering this particular large specimen, the experiment resulted in the acceptable mean difference between lateral strain using both methods is 5.1 percent, and 14.5 percent for the axial strain. This occurrence is inevitable due to the heterogeneity of the concrete system and the placement of the monitoring point in digital image correlation method, although the comparison of stress-strain relationship in both methods still indicates a conformity. Based on the results of the present experiments, the authors recommend the noncontact method for a detailed investigation of the material behavior during the uniaxial compressive strength tests. Full field strain measurement enables this digital method to examine local strains near cracks at any point, a very useful tool for studying material deformation behavior.     

Digital image correlation strain measurement of thick adherend shear test specimen joined with an epoxy film adhesive

Structural bonding and bonded repairs of composite materials become more and more important. Understanding the strain within the bondline leads to suitable bonding design. For new design approaches the strain distribution within the bondline has to be analyzed. Thus, often finite element analysis (FE) are used. However, a huge challenge is the availability of reliable material properties for the adhesives and their validation. Previous work has shown that it is possible to measure the small displacements resulting within thin epoxy film adhesives using high resolution digital image correlation (DIC). In this work a 2D DIC setup with a high resolution consumer camera is used to visualize the strain distribution within the bondline over the length of the joint as well as over the adhesive thickness. Therefore, single lap joints with thick aluminum adherends according to ASTM D 5656 are manufactured and tested. Local 2D DIC strain measurements are performed and analyzed. Two different camera setups are used and compared. The evaluation provides reliable material data and enables a look insight the bondline. The results of the full field strain data measured with DIC are compared with numerical simulations. Thus, material models as well as chosen parameters for the adhesive are validated. Compared to extensometers, giving only point-wise information for fixed measuring points, the DIC allows a virtual point-wise inspection along the complete bondline. Furthermore, it allows measuring close to the bondline to reduce the influence of adherend deformation.     

Sensor interpixel correlation analysis and reduction for color filter array high dynamic range image reconstruction

High dynamic range imaging (HDRI) by bracketing of low dynamic range (LDR) images is demanding, as the sensor is deliberately operated at saturation. This exacerbates any crosstalk, interpixel capacitance, blooming and smear, all causing interpixel correlations (IC) and a deteriorated modulation transfer function (MTF). Established HDRI algorithms exclude saturated pixels, but generally overlook IC. This work presents a calibration method to estimate the affected region from saturated pixels for a color filter array (CFA) sensor, using the native CFA as a matched filter. The method minimizes color crosstalk given a set of candidates for proximity regions, and requires no special setup. Results are shown for a 21‐bit HDR output image with improved color fidelity and reduced noise. The calibration reduces IC in the LDR images and is performed only once for a given sensor. The improvement is applicable to any HDRI algorithm based on CFA image bracketing, irrespective of sensor technology. Generalizations to subsaturated and supersaturated pixels are described, facilitating a suggested irradiance‐exposure dependent point spread function charge repatriation strategy.